27.0 inch capacitive touch panel
27 inch is where capacitive starts replacing infrared indoors — glass-to-glass gives a flush front face for design-led products.
FOB Shenzhen, G+G panel with controller and 1.8 m USB cable, 1–50 pcs. Custom coating, glass thickness and printed border quoted on drawing.
27.0 inch panel, G+G or G+FF
OD 622 × 360 mm, active area 598 × 336 mm, printed border 12 mm. The controller is bonded and tested against this exact panel before packing, so the pair arrives calibrated rather than needing a setup step at your line.
- OD 622 × 360 mm · VA 598 × 336 mm · border 12 mm
- 6 H glass, 10-point, USB / I2C / RS232 controller included
- 368 pcs in stock
Controller included. Every panel ships with a matched controller, flashed and tested against that panel — not a generic board.
FPC tail. The tail can leave on any of the four sides, same-side or opposite-side contact, without changing the outline.
Three numbers, not one
Unlike an infrared frame, a capacitive panel is defined by three dimensions. The OD is the outside of the glass and is what your housing is cut to. The VA is the visible area your UI is designed against. The sensor is the ITO pattern inside the printed border.
| Outline (OD) | 622 × 360 mm |
| Active area (VA) | 598 × 336 mm |
| Sensor | 614 × 352 mm |
| Printed border | 12 mm typical, 6 mm minimum |
Typical builds at this size: design-led kiosk, interactive table, retail display.
Solid outline = OD 622 × 360 mm · dashed = VA active area 598 × 336 mm
27.0 inch panel — options and unit price
| Configuration | 1–9 pcs | 10–49 pcs | 50–199 pcs | 200+ pcs |
|---|---|---|---|---|
| G+G, 1.1 mm glass | $170 | $156 | $144 | $129 |
| G+FF, 1.1 mm glass | $150 | $136 | $126 | $114 |
| + 2.0 mm glass | + $20 | + $19 | + $17 | + $15 |
| + AG anti-glare coating | + $14 | + $13 | + $12 | + $10 |
27.0 inch panel — full specification
| Mechanical | |
| Adopted size | 27.0" 16:9 |
|---|---|
| Outline (OD) | 622 × 360 mm |
| Active area (VA) | 598 × 336 mm |
| Sensor size | 614 × 352 mm |
| Total thickness | 1.6 mm (1.1 mm glass) / 2.3 mm (1.8 mm) |
| Optical & touch | |
| Surface hardness | ≥ 6 H |
| Touch points | 10 (up to 40 on large format) |
| Transparency | ≥ 85 % |
| Haze | < 3 % (AG 3–8 % optional) |
| Response time | ≤ 10 ms |
| Accuracy | ± 1.5 mm |
| Touch life | > 10 million touches |
| Interface & environment | |
| Interface | USB HID / I2C / RS232 |
| Report rate | ≥ 100 Hz |
| Operating temperature | −20 °C to +70 °C |
| Operating system | Windows, Android, Linux, Chrome OS |
| Certification | CE, FCC, RoHS |
What happens after the carton is open
A capacitive panel needs no calibration — the sensor is bonded to the glass, so the coordinates are geometry rather than measurement. What it does need is the right settings for your glass stack, and a bonding process that does not trap air.
Plug and play over USB
Windows, Android, Linux and ChromeOS pick it up as a HID touch digitizer with nothing installed. I2C and RS232 versions available for boards without a USB host.
Firmware tuned to your stack
Threshold, report rate, edge suppression and ESD level are set for the cover glass you specify — then shipped as a settings file you can clone across a batch.
Bonding and install guidance
OCA versus tape versus air gap, FPC bend radius, shield grounding under 4 Ω. We will join the first bonding run by video if it is your first one.
27.0 inch panel questions
What are the OD, VA and sensor sizes of the 27.0 inch panel?
Can I change the cover glass thickness?
Is a controller and cable included?
What is the lead time?
Is this a capacitive touch screen or only a panel?
The names this part travels under
On a specification you will also meet PCAP and projected capacitive touch panel, which describe the sensing method rather than the part: a grid of ITO electrodes projected through the cover glass. Every panel on this site is projected capacitive, so the two terms are not a different product line — they are a more precise name for the one you are looking at.
Where these panels end up: kiosks, HMI, medical instruments, retail signage — capacitive touch applications →
Tell us the size. We will tell you what fits.
Send a drawing, a size, or just a photo of the screen you are building around. Our engineers reply with a matched part and a price within 12 working hours.