43.0 inch capacitive touch panel
43 inch capacitive panels are made to order with a 2–3 week lead time. They are the right choice outdoors-facing indoor installs where a flush glass front matters.
FOB Shenzhen, G+G panel with controller and 1.8 m USB cable, 1–50 pcs. Custom coating, glass thickness and printed border quoted on drawing.
How the 43.0 inch leaves the line
Glass bonded to sensor, FPC bonded to the tail, then touched at the centre and all four corners before vacuum packing. The printed border on this size is 15 mm, which is what you have to leave free in the housing.
- OD 982 × 565 mm · VA 952 × 535 mm · border 15 mm
- 6 H glass, 10-point, USB / I2C / RS232 controller included
- 306 pcs in stock
FPC tail. The tail can leave on any of the four sides, same-side or opposite-side contact, without changing the outline.
Cable and tail. 1.8 m USB cable as standard. I2C, RS232 and longer tails are the same price, specified at the drawing stage.
Three numbers, not one
Unlike an infrared frame, a capacitive panel is defined by three dimensions. The OD is the outside of the glass and is what your housing is cut to. The VA is the visible area your UI is designed against. The sensor is the ITO pattern inside the printed border.
| Outline (OD) | 982 × 565 mm |
| Active area (VA) | 952 × 535 mm |
| Sensor | 974 × 557 mm |
| Printed border | 15 mm typical, 6 mm minimum |
Typical builds at this size: large signage, lobby display, boardroom.
Solid outline = OD 982 × 565 mm · dashed = VA active area 952 × 535 mm
43.0 inch panel — options and unit price
| Configuration | 1–9 pcs | 10–49 pcs | 50–199 pcs | 200+ pcs |
|---|---|---|---|---|
| G+G, 1.1 mm glass | $315 | $290 | $268 | $239 |
| G+FF, 1.1 mm glass | $277 | $252 | $233 | $211 |
| + 2.0 mm glass | + $38 | + $35 | + $32 | + $28 |
| + AG anti-glare coating | + $25 | + $24 | + $22 | + $19 |
43.0 inch panel — full specification
| Mechanical | |
| Adopted size | 43.0" 16:9 |
|---|---|
| Outline (OD) | 982 × 565 mm |
| Active area (VA) | 952 × 535 mm |
| Sensor size | 974 × 557 mm |
| Total thickness | 1.6 mm (1.1 mm glass) / 2.3 mm (1.8 mm) |
| Optical & touch | |
| Surface hardness | ≥ 6 H |
| Touch points | 10 (up to 40 on large format) |
| Transparency | ≥ 85 % |
| Haze | < 3 % (AG 3–8 % optional) |
| Response time | ≤ 10 ms |
| Accuracy | ± 1.5 mm |
| Touch life | > 10 million touches |
| Interface & environment | |
| Interface | USB HID / I2C / RS232 |
| Report rate | ≥ 100 Hz |
| Operating temperature | −20 °C to +70 °C |
| Operating system | Windows, Android, Linux, Chrome OS |
| Certification | CE, FCC, RoHS |
What happens after the carton is open
A capacitive panel needs no calibration — the sensor is bonded to the glass, so the coordinates are geometry rather than measurement. What it does need is the right settings for your glass stack, and a bonding process that does not trap air.
Plug and play over USB
Windows, Android, Linux and ChromeOS pick it up as a HID touch digitizer with nothing installed. I2C and RS232 versions available for boards without a USB host.
Firmware tuned to your stack
Threshold, report rate, edge suppression and ESD level are set for the cover glass you specify — then shipped as a settings file you can clone across a batch.
Bonding and install guidance
OCA versus tape versus air gap, FPC bend radius, shield grounding under 4 Ω. We will join the first bonding run by video if it is your first one.
43.0 inch panel questions
What are the OD, VA and sensor sizes of the 43.0 inch panel?
Can I change the cover glass thickness?
Is a controller and cable included?
What is the lead time?
Our BOM says capacitive touch TP - is that the same part?
The names this part travels under
On a specification you will also meet PCAP and projected capacitive touch panel, which describe the sensing method rather than the part: a grid of ITO electrodes projected through the cover glass. Every panel on this site is projected capacitive, so the two terms are not a different product line — they are a more precise name for the one you are looking at.
Where these panels end up: kiosks, HMI, medical instruments, retail signage — capacitive touch applications →
Tell us the size. We will tell you what fits.
Send a drawing, a size, or just a photo of the screen you are building around. Our engineers reply with a matched part and a price within 12 working hours.