65 inch infrared touch frame
65 inch is where infrared still wins on cost per square metre. Classroom boards and conference displays live at this size, and the frame is light enough for a two-person wall mount.
FOB Shenzhen, frame only, 1–50 pcs. Add $64 for 3 mm tempered glass. Volume tiers quoted on request.
The 65 inch, photographed before packing
Every unit is powered up and touched at nine points before it goes into the tube. At 1465 mm wide the finished frame weighs about 8.1 kg, which is why it travels in a tube with foam ends rather than a flat carton.
- 1465 × 839 mm outer, 1439 × 809 mm active area
- 2–40 touch points, USB HID, no driver for Windows, Android or Linux
- 447 pcs in stock, leaves in 3–7 days
Corner joint. Cast corner block pinned into the extrusion — this is what keeps an 86 inch frame flat instead of bowing in the middle.
Packing. One frame per cardboard tube with foam ends. Crates start at 98 inch, where a tube stops being practical.
What the 65 inch frame fits
The active area is 1439 × 809 mm — a standard 65 inch 16:9 panel. The frame adds 13 mm on three sides and 19 mm at the bottom, which is where the controller PCB and USB cable sit.
- Outer frame: 1465 × 839 mm, 9.5 mm deep
- Housing cut-out: leave 1469 × 843 mm plus 3 mm clearance for the cable
- Glass clearance: up to 5 mm thick; 8 mm with the wide-gap version
- Mounting: front-flush with M3 inserts, or side brackets
Typical builds at this size: classroom board, conference display, training room.
65 inch frame — options and unit price
Indicative FOB Shenzhen prices at 10-point configuration. Higher touch counts add controller cost, not sensor cost, so the jump is smaller than most buyers expect.
| Configuration | 1–9 pcs | 10–49 pcs | 50–199 pcs | 200+ pcs |
|---|---|---|---|---|
| 10-point | $195 | $183 | $172 | $156 |
| 20-point | $195 | $183 | $172 | $156 |
| 32-point | $207 | $194 | $182 | $165 |
| 40-point | $218 | $205 | $192 | $175 |
| + 3 mm tempered glass | + $64 | + $58 | + $52 | + $48 |
65 inch frame — full specification
| Mechanical | |
| Adopted screen | 65" 16:9 (active area 1439 × 809 mm) |
|---|---|
| Frame outer size | 1465 × 839 mm (± 1.0 mm) |
| Bezel width | 13 mm side / 19 mm bottom (15.5 mm uniform optional) |
| Frame depth | 9.5 mm |
| Frame material | Aluminium alloy 6063, black anodised |
| Net weight | 2.4 kg |
| Touch performance | |
| Touch points | 2 / 4 / 6 / 10 / 16 / 20 / 32 / 40 |
| Resolution | 32,768 × 32,768 (interpolated) |
| Response time | ≤ 8 ms |
| Report rate | 200 Hz |
| Accuracy | ± 2 mm (typical, centre 90 % area) |
| Minimum touch object | 5 mm — 3 mm with fine-tip option |
| Electrical & interface | |
| Interface | USB 2.0 HID, plug-and-play; RS232 optional |
| Power | USB 5 V, < 200 mA |
| Operating system | Windows 7/10/11, Android, Linux, Chrome OS |
| Environment & compliance | |
| Operating temperature | −20 °C to +70 °C |
| Humidity | 10 – 90 % RH, non-condensing |
| Ambient light | Up to 30,000 lux (direct-sunlight model on request) |
| MTBF | ≥ 30,000 hours |
| Touch life | > 50 million touches |
| Certification | CE, FCC, RoHS |
Values are typical for this size. Guaranteed limits are stated on the datasheet issued with your order.
What happens after the carton is open
A frame is not finished hardware until it is calibrated against the display it sits on. Three things ship with this size to get you there, and none of them are extras.
No driver, on any system
USB HID digitizer. Windows 10/11, Android, Linux and ChromeOS enumerate it without installing anything. macOS reports single point only — worth knowing before you commit.
Calibration tool and profile
Windows and Linux builds, 4/9/25-point runs, written to the controller so it survives a power cycle. Stuck? A ten-minute remote session with our engineer calibrates it with you.
Installation sheet for this size
Clearance, 0.5 N·m torque, ground under 4 Ω, 3 m passive USB limit — plus the symptom table that covers most first-install problems.
Installation guide · Calibration & software · OS compatibility
65 inch frame questions
What is the outer size of a 65 inch frame?
Can I get this size with a different bezel?
How many units of the 65 inch frame fit in a carton?
Do you supply the tempered glass with the frame?
Is this an IR touch frame or an infrared touch screen?
One rectangle, four names on the paperwork
The distinction people trip over is frame versus screen. A touch screen frame is the sensor ring only; an infrared touch screen is that ring plus an LCD behind it. We build the first and leave the panel choice to you, which is why a 55 inch unit costs a fraction of a finished touch monitor. Send the drawing with either title and the quote comes back the same.
If the screen already exists, this is the part that converts it. Clamp the frame around the TV or monitor bezel, plug the USB in, and the display reports as a touchscreen without anything being opened. Sizes above 110 inch ship knocked down because a 2.5 m rectangle is a freight problem, not a manufacturing one.
If your enquiry uses a name not listed here, send it anyway — a photo of the old part or the housing opening settles it faster than any glossary. Full terminology list →
Tell us the size. We will tell you what fits.
Send a drawing, a size, or just a photo of the screen you are building around. Our engineers reply with a matched part and a price within 12 working hours.