98 inch infrared touch frame
98 inch ships in a wooden crate and needs two people to lift. We build these individually, run a four-corner touch test, and photograph the frame before packing.
FOB Shenzhen, frame only, 1–50 pcs. Add $130 for 3 mm tempered glass. Volume tiers quoted on request.
What is in the 98 inch box
One frame at 2196 × 1250 mm, one controller board, a 1.8 m USB cable and four mounting brackets. Glass is separate — add it only if your housing does not already carry a front sheet.
- 2196 × 1250 mm outer, 2170 × 1220 mm active area
- 2–40 touch points, USB HID, no driver for Windows, Android or Linux
- 318 pcs in stock, leaves in 3–7 days
Corner joint. Cast corner block pinned into the extrusion — this is what keeps an 86 inch frame flat instead of bowing in the middle.
Packing. One frame per cardboard tube with foam ends. Crates start at 98 inch, where a tube stops being practical.
What the 98 inch frame fits
The active area is 2170 × 1220 mm — a standard 98 inch 16:9 panel. The frame adds 13 mm on three sides and 19 mm at the bottom, which is where the controller PCB and USB cable sit.
- Outer frame: 2196 × 1250 mm, 9.5 mm deep
- Housing cut-out: leave 2200 × 1254 mm plus 3 mm clearance for the cable
- Glass clearance: up to 5 mm thick; 8 mm with the wide-gap version
- Mounting: front-flush with M3 inserts, or side brackets
Typical builds at this size: auditorium wall, large format board, public information wall.
98 inch frame — options and unit price
Indicative FOB Shenzhen prices at 10-point configuration. Higher touch counts add controller cost, not sensor cost, so the jump is smaller than most buyers expect.
| Configuration | 1–9 pcs | 10–49 pcs | 50–199 pcs | 200+ pcs |
|---|---|---|---|---|
| 10-point | $430 | $404 | $378 | $344 |
| 20-point | $430 | $404 | $378 | $344 |
| 32-point | $456 | $428 | $401 | $365 |
| 40-point | $482 | $453 | $424 | $385 |
| + 3 mm tempered glass | + $130 | + $117 | + $107 | + $98 |
98 inch frame — full specification
| Mechanical | |
| Adopted screen | 98" 16:9 (active area 2170 × 1220 mm) |
|---|---|
| Frame outer size | 2196 × 1250 mm (± 1.0 mm) |
| Bezel width | 13 mm side / 19 mm bottom (15.5 mm uniform optional) |
| Frame depth | 9.5 mm |
| Frame material | Aluminium alloy 6063, black anodised |
| Net weight | 3.3 kg |
| Touch performance | |
| Touch points | 2 / 4 / 6 / 10 / 16 / 20 / 32 / 40 |
| Resolution | 32,768 × 32,768 (interpolated) |
| Response time | ≤ 8 ms |
| Report rate | 200 Hz |
| Accuracy | ± 2 mm (typical, centre 90 % area) |
| Minimum touch object | 5 mm — 3 mm with fine-tip option |
| Electrical & interface | |
| Interface | USB 2.0 HID, plug-and-play; RS232 optional |
| Power | USB 5 V, < 200 mA |
| Operating system | Windows 7/10/11, Android, Linux, Chrome OS |
| Environment & compliance | |
| Operating temperature | −20 °C to +70 °C |
| Humidity | 10 – 90 % RH, non-condensing |
| Ambient light | Up to 30,000 lux (direct-sunlight model on request) |
| MTBF | ≥ 30,000 hours |
| Touch life | > 50 million touches |
| Certification | CE, FCC, RoHS |
Values are typical for this size. Guaranteed limits are stated on the datasheet issued with your order.
What happens after the carton is open
A frame is not finished hardware until it is calibrated against the display it sits on. Three things ship with this size to get you there, and none of them are extras.
No driver, on any system
USB HID digitizer. Windows 10/11, Android, Linux and ChromeOS enumerate it without installing anything. macOS reports single point only — worth knowing before you commit.
Calibration tool and profile
Windows and Linux builds, 4/9/25-point runs, written to the controller so it survives a power cycle. Stuck? A ten-minute remote session with our engineer calibrates it with you.
Installation sheet for this size
Clearance, 0.5 N·m torque, ground under 4 Ω, 3 m passive USB limit — plus the symptom table that covers most first-install problems.
Installation guide · Calibration & software · OS compatibility
98 inch frame questions
What is the outer size of a 98 inch frame?
Can I get this size with a different bezel?
How many units of the 98 inch frame fit in a carton?
Do you supply the tempered glass with the frame?
Is this an IR touch frame or an infrared touch screen?
Also quoted as an IR touch frame, a touch screen or an overlay
Ask ten buyers for this part and you get four different names for it: infrared touch frame, IR touch frame, infrared touch screen and touch overlay. Nothing changes in the box. It is an aluminium rectangle with LEDs down two sides, photodiodes down the other two, and a controller board in the bottom rail. If your drawing is titled “IR touch screen” but your housing already carries the glass, you still need the frame and not a display — we quote it either way.
At 98 inch this is what the trade calls a large touch frame or a large format infrared touch frame. Practically it means two things: it ships knocked down as four extrusions and four corners to keep freight sane, and the corner joints carry the accuracy. Above 200 inch the aluminium is spliced too — the touch surface stays continuous, only the extrusion is joined.
Half of these frames never go into a new machine at all. They go onto a TV or a monitor that is already on the wall, and the buyer wants a finger to work on it. Same extrusion, same controller, ordered with a longer cable — the overlay guide covers the fit.
If your enquiry uses a name not listed here, send it anyway — a photo of the old part or the housing opening settles it faster than any glossary. Full terminology list →
Tell us the size. We will tell you what fits.
Send a drawing, a size, or just a photo of the screen you are building around. Our engineers reply with a matched part and a price within 12 working hours.